GSD 280/250 D with boom TA8 and boom DA7,5

NEUERO Mobile Pneumatic Conveyors Type GSD Designed for suction only or suction/pressure conveying for unloading of ships and loading onto trucks, into railway wagons or directly to silo storage.

Max. capacity 180 t/h grain

High pressure centrifugal blower of two-stage assembly consisting of a fan housing with dynamically balanced impellers,
pillow block, made of cast iron with roller bearings, V-belt drive with tensioning device.

All NEUERO conveyors are tested and adjusted at the factory and supplied with a corresponding certificate.

Air-flow regulator of special NEUERO design for controlling the conveying condition and for limitation of conveying air velocity and for limitation of the load of the engine.

Rotary airlock made of cast iron housing incorporating a rotor with tungsten carbide tipped blades to increase the service life of the airlock. Fitted with slip clutch to protect the airlock from damage in case of blocking. Unit driven by V-belts or hydraulic motor.

Primary intake-cyclone of two-piece design, turnable, made of steel sheets with replaceable wearing plates made from manganese alloy, fitted with inspection flap and inside separator to avoid grain and foreign material going into the centrifugal blowers.

Control panel incorporating all switch gears and automatic devices.

Frame with 4 mechanically operated supports, fitted to the corners of the box-type frame, 4 eye-bolts, 2 running axles, turntable steering, 1 brake axle and overrun brake as optional, 4 air-tyred wheels.

Drive for series 210:

Diesel engine, 6 cyl. 4-stroke with direct injection, electric installation of 24 volts, radiator designed for 55° C ambient temperature, with silencer, air filter, engine cover and stop-magnet, 2 batteries, each 12 volts, fuel tank, automatic starting clutch and safety device to prevent excessive water temperature and oil-pressure failure; or

Electric motor of 90 or 110 kW with special characteristic for heavy-duty start.

Drive for series 250 / 280:

Diesel engine, 8cyl., 4-stroke with direct injection, electric installation of 24 volts, radiator designed for 55° C ambient temperature, with silencer, air filter, engine cover and stop-magnet, 2 batteries, each 12 volts, fuel tank, automatic starting clutch and safety device to prevent excessive water temperature and oil-pressure failure; or

Electric motor of 160kW or 200 kW with special characteristic
for heavy-duty start.

Teleskopic-Hydraulic boom TA 8 slewing range 310°, boom length 8 m, telescoping range max. 2,2 m, boom lift 45°.
consists of: telescoping boom with telescoping pipe, 90° bend, universal joint, vertical conveying pipe, boom bearing, slewing drive, support, slewing rim, tow hydraulic cylinders, hydraulic aggregate complete with electric system and remote control with cable of 15 m length.